Bulldog Presses(ZA)

Bulldog S110 Drip Tech Rosin Press

  • Sale
  • Regular price R 7,100.00
Tax included. Shipping calculated at checkout.


Bulldog Press S110 DripTech Rosin Press

Introducing Bulldog Presses all new DripTech model,

Proudly made in South Africa.

This Rosin Press now comes with improved Hydraulic system and a Lever that can change normal pressing into a DripTech system. Allowing this action of gravity makes collecting rosin much easier and gets the rosin away from the heat plates faster, to preserve the terpenes. Too much heat on the terpenes can be damaging and quality will be less potent. 

Using butane or ethanol for Rosin extractions are both time consuming and dangerous. Rosin production requires only two mechanisms heat and pressure. This method of extraction yields a pure and consumable product in a matter of minutes.

How To Use the Rosin Press:

Select good quality product (the higher the quality the better the end product)

1. Make sure product is properly cured (recommended 60 to 65% humidity)
2. Place plant material into Rosin filter bag (filter bags are necessary when making rosin with either hash or kief)
3. Place Rosin filter into the supplied parchment paper and place between the heating plates.
3. Set the temperature on the PID Recommended settings for flower to between 80 and 105 degrees for 60 to 180 seconds.
 For pressing sift or kief set temps to between 65 and 88 degrees for optimum results. 
4. Fold top of parchment paper up against the top plate securing it with the supplied magnet so you can watch the flow of the rosin.
5. After removing flower from parchment paper collect rosin with dabber tool and place it into supplied Silicone Rosin Tub.

The entire process can be repeated for a second time re-using the same product for an additional amount of Rosin (but not the same quality). 

Pack, Press ,Enjoy

Experienced extractors know that the maximum pressure necessary at the contact points is 1000 Psi Any more pressure than this will result in a forcing out of less desirable compounds such as waxes, fats, lipids and chlorophyll. Pressing a 50x100mm bag of product would equate to a surface area of 5000 mm2. To apply 1000 Psi 4 tons of pressure would be required. 

Bulldog presses provide a 5 Ton Hydraulic system, thereby ensuring adequate pressure for maximum extraction.

Pack Press and Enjoy... 

How to use the Drip Tech Lever:

  • Allow heat plates to warm up to desired temperature.
  • Put your product in the middle of the heating plates.
  • Tighten knob on the bottom of the Bottle Jack.
  • Slowly start pressing the heating plates together at a +- 30% strength, allowing terpenes to slowly melt.
  • While waiting, pull out the lever then tilt the press till it is resting comfortably on the lever.
  • Place a silicone mat or parchment paper under the plates to collect rosin.
  • Continue pressing for desired time period.

Bulldog Press S110 DripTech Rosin Press Specs:

DripTech
5 Ton BulldogPress (S110)
Weight 18kg
Height 380mm
Width 110mm
Breath 190mm
Powder Coated, Laser cut (10mm and face plate 8mm) Thick Steel

6082 CNC Aluminium Duel Heated Plates
Height 28mm
Width 110mm
Breath 90mm

Duel Heated Plates: 250V / 150W

1 x PID Temperature Controller ITC-106
Supply Voltage AC 100-240V 50/60Hz
Power Consumption: 5VA
Display Code: High lamination LED
Display Accuracy: +-0.2%FS0.1°C/°F(≤1000°C/°F) ; 1°C/°F(≥1000°C/°F)

Bottle Jack: 5 Ton

1 year electronic and Hydraulic guarantee and
a lifetime warranty on the frame.

Please note this product does not qualify for free shipping. For more info see our shipping policy.

Looking for the Bulldog Press S110 DripTech Rosin Press or maybe a bigger Rosin Press? Contact Skyline Vape & Smoke Lounge today or take a look through our online store for details on our offers.

We Don't Just Ship to JohannesburgCapetown & Durban we ship Nationwide Anywhere in South Africa